Technical DrawingLaajuus (5 op)
Tunnus: 4_EIP8010
Laajuus
5 op
Opetuskieli
- englanti
Osaamistavoitteet
The student knows the basics of technical drawing, projections used in technical drawing, the markings and symbols, part and assembly drawings, parts lists, tolerances in machine design and machine parts modeling and drawing processes. The student also gets an understanding of the different machine construction documents, parts manufacturing drawings, assembly drawings, PI-diagrams, piping and layout drawings. The student gets acquainted with the three-dimensional parametric design tool for creating the assembly and part drawings. The basics in level and space geometry and geometrical constructions are covered.
Sisältö
Basics in technical drawing
Scales, projections, sections views, line widths, texts, dimensioning methods, tolerances, fits, surface and welding symbols, diagrams and bill of materials
Part and assembly drawings and their link to product structures
Taking manufacturing into account when creating technical drawings (welding and milling assembly drawings)
Using a CAD program to create manufacturing drawings
Standards used in technical drawing
Level and space geometry
Geometrical constructions
Oppimateriaalit
Basic Engineering Drawing, R.S. Rhodes & L.B. Cook
Material handed in Moodle
Esitietovaatimukset
None
Ilmoittautumisaika
01.08.2024 - 15.09.2024
Ajoitus
02.09.2024 - 31.12.2024
Laajuus
5 op
Toteutustapa
Lähiopetus
Yksikkö
Kansainväliset AMK-koulutukset
Toimipiste
Microkadun kampus
Opetuskielet
- Englanti
Tutkinto-ohjelma
- Degree Programme in Mechanical Engineering
Opettaja
- Tuukka Heiskanen
- Tapio Korpijaakko
Opiskelijaryhmät
-
IE24SPMechanical Engineering
Esitietovaatimukset
None
Oppimateriaali ja suositeltava kirjallisuus
Basic Engineering Drawing, R.S. Rhodes & L.B. Cook
Material handed in Moodle
Ilmoittautumisaika
01.08.2024 - 15.09.2024
Ajoitus
30.08.2024 - 31.12.2024
Laajuus
5 op
Toteutustapa
Lähiopetus
Yksikkö
Kansainväliset AMK-koulutukset
Toimipiste
Varkauden kampus
Opetuskielet
- Englanti
Paikat
20 - 30
Tutkinto-ohjelma
- Degree Programme in Industrial Management
Opettaja
- Taneli Heikkilä
- Anssi Suhonen
- Ari Mikkonen
Opiskelijaryhmät
-
IM24SPIndustrial Management
Esitietovaatimukset
None
Oppimateriaali ja suositeltava kirjallisuus
Basic Engineering Drawing, R.S. Rhodes & L.B. Cook
Material handed in Moodle
Lisätietoja opiskelijoille
The section of Technical geometry (1 cru) uses the learning platform of the Moodle. You are able to find all materials, assignments, lecture notes etc, from that learning platform.
You can complete studies at your own pace.
The course includes 50 assignments, which you can do at your own pace.
Evaluation criterion is
80 % - 100 % = Accepted
0 % - 79.99 % = Abandon
The number of the attempts of the assignments are unlimited.
Themes
- Right triangle
- Isosceles triangle
- Equilateral triangle
- Triangle's circuit and area
- Rectangle and square
- Parallelogram and rhombus
- Trapezium
- Circle and its parts
- Trigonometric functions
- Sine law and cosine law
- Application of the sine law
- Rectangular parallelepiped
- Cube
- Circle-based cylinder
- Circle-based cone
- Pyramids
- Sphere
- Uniformity and scale
- Vectors
- Length of the vector and unit vector
- Vectors in coordinate systems
- Scalar or dot product of the vectors
- Parallelogram grid
- Line segment
- Angle between two vectors
Ilmoittautumisaika
01.08.2023 - 15.09.2023
Ajoitus
04.09.2023 - 31.12.2023
Laajuus
5 op
Toteutustapa
Lähiopetus
Yksikkö
Kansainväliset AMK-koulutukset
Toimipiste
Varkauden kampus
Opetuskielet
- Englanti
Paikat
10 - 30
Opettaja
- Antti Hänninen
- Ari Mikkonen
Opiskelijaryhmät
-
IM23SPIndustrial Management
Esitietovaatimukset
None
Oppimateriaali ja suositeltava kirjallisuus
Material handed in Moodle
Lisätietoja opiskelijoille
The section of Technical geometry (1 cru) uses the learnig platform of the Moodle. You are able to find all materials, assignments, lecture notes etc, from that learning platform.
You can complete studies at your own pace.
All lectures are recorded and added with the lecture notes to the learning platform of the Moodle.
The course includes 50 assignments, which you can do at your own pace.
Evaluation criterion is
80 % - 100 % = Accepted
0 % - 79.99 % = Abandon
The number of the attempts of the assignments are unlimited.
Themes
- Right triangle
- Isosceles triangle
- Equilateral triangle
- Triangle's circuit and area
- Rectangle and square
- Parallelogram and rhombus
- Trapezium
- Circle and its parts
- Trigonometric functions
- Sine law and cosine law
- Application of the sine law
- Rectangular parallelepiped
- Cube
- Circle-based cylinder
- Circle-based cone
- Pyramids
- Sphere
- Uniformity and scale
- Vectors
- Length of the vector and unit vector
- Vectors in coordinate systems
- Scalar or dot product of the vectors
- Parallelogram grid
- Line segment
- Angle between two vectors
Ilmoittautumisaika
01.08.2023 - 15.09.2023
Ajoitus
04.09.2023 - 31.12.2023
Laajuus
5 op
Toteutustapa
Lähiopetus
Yksikkö
Kansainväliset AMK-koulutukset
Toimipiste
Microkadun kampus
Opetuskielet
- Englanti
Paikat
5 - 30
Opettaja
- Tuukka Heiskanen
- Tapio Korpijaakko
Opiskelijaryhmät
-
IE23SPMechanical Engineering
Esitietovaatimukset
None
Oppimateriaali ja suositeltava kirjallisuus
Material handed in Moodle